Carbon adhesive for coatings - SCK Adhesive for carbon & plastic

Description

The SCK Carbon adhesive for coatings is the perfect adhesive for bonding carbon fabrics to plastics and metal. With a specially developed formula, this adhesive offers excellent adhesion, high load-bearing capacity and temperature resistance up to 135°C. Ideal for carbon finishing and various DIY projects.

Why this carbon adhesive?

• Maximum adhesion between carbon and various plastics

• High impact resistance and Temperature resistance up to 135°C

• Fast curing after 2-3 hours

• For demanding Carbon coatings on plastic and metal

Application of the SCK Carbon adhesive

1. PreparationClean the surfaces to be treated thoroughly.

2. Apply: Apply the adhesive in two thin layers with a Spray gun on.

3. Placement of the tissueAfter about 5 minutes you can place and align the fabric on the component.

4. Activation: Use a Hot air gun, to activate the adhesive only on the heated areas.

Advantages of the SCK carbon adhesive

• Optimum adhesion on various substrates

• Fast curing and easy handling

• Long shelf life (1-1 ½ weeks in the airtight gun)

• Temperature resistant and resistant to extreme loads

• Simple processing by spray gun

Technical data

• Density0.82 ± 0.01 g/cm³

• Viscosity215 ± 35 mPas (at 20°C)

• Injection pressure4-6 bar

• Material printing: 2-4 bar

• Curing2-3 hours at room temperature

• Solids content: 15 ± 1

Application note

This adhesive fulfills the legal requirements of the Chemicals Prohibition Ordinance (ChemVerbotsV). For detailed safety information, please refer to the Safety data sheet (SDB).